Gira Videoterminal
-
-
-
Specification
-
Code number
-
Glass mint
-
2600 18
-
Glass white
-
2600 12
-
Glass black
-
2600 05
-
The Gira VideoTerminal is a home station with an especially large active 14. 48 cm (5.7") TFT colour display and hands-free speech function for Gira intercom system.
Technical characteristics
-
supply voltage
-
24 V DC ± 10 %
-
temperature range
-
from -5°С up to +40°С
-
connection
-
2 screw terminals for 2-wire bus 2 screw terminals for power supply 24 V DC ± 10 % 2 screw terminals for floor-call button 2 system bus connector strips
-
Dimensions
-
(Width x Height x Depth) 182 x 240 x 52 mm
-
Recommended mounting height
-
1,60 м
-
The length of the power supply wires - videoterminal
-
the video terminal - no more than 80 m for the cable ø0, 8mm no more than 50 m for the cable ø0, 6mm
-
Standard television image
-
PAL
The Gira VideoTerminal is a home station with an especially large.
-
-
The Gira VideoTerminal is a home station with an especially large active 14. 48 cm (5.7") TFT colour display and hands-free speech function for Gira intercom system.
The VideoTerminal has the following features:
- Large active 14. 48 cm (5.7") TFT colour display and resolution of 640 x 480 pixels
- Text display (OSD function) on the color TFT display for imaging of the switched on camera and for the menu both the end user, and the fitter.
- The concealed and surface-mounted of the separate device (mounting frame 1252 04 or 1251 04) or in the form of devices combination in combination with a modular functional pole 1371 00, 1372 00, 1373 00.
- Turned and pressed castor of control with backlight for receiveibing a call and navigate the menus.
- Visual confirmation on the control castor with green or red LED indicator according to the state of the system.
- Four function keys with the same setting:
- Call menu level. Switching on/over if camera
- Switching on lighting
- Swithcing on/off call-in
- Opening the door
- Camera switching is a purposeful choice up to three colour cameras. It is specified on the text display which camera is activated at the moment.
- Castor control for navigation to the menu.
- For the end user can change the values of brightness, colour intensity, contrast and switch-on time via the menu.
- For electrician: language selection (German, English), frequency setting, switching LED illumination on/off and termination of the cable, brightness, colour intensity, contrast and switch-on time via the menu.
- High quality of the image even when viewed at an angle.
- Backlight via CCFL tube
- Hands-free is transmission of voice information with suppression of an echo and background noise.
- Function of forced function at very loud noise during a call.
- Signaling audio and video, which excluds the wrong polarity and protected from short circuit the 2-wire tire Gira.
- Parallel connection up to 3 video terminals is possible.
- Commissioning by only one construction electrician thanks to a simple procedure of commissioning.
- Differentiation of call signals: call from a door, floor and an internal call.
- Choice of five different call tone melodies, which can be fixed by different call buttons.
- Possibility of call signal loudness control and speech by 5 steps.
- Call signal switching off. At the disconnected call signal a call from the door is shown visually.
- Connected automatic opening the door: at the switchig of the door opener function is automatically is activated after pressing the button of call door station.
- Free intra voice communication at max. with 10 other room stations.
- Automatic switching on TFT display when the bell is ringing.
- Integrated lock of interception and peeping.
- It is required two additional stands to the video terminal for power supply of the device of 24 V DC ± 10%. Power supply is carried out from the power supply of intercom system, an art. No. 2570 00.
-